Anil Scientico

Split Type Tube Furnace




We trade in the top of the line Split Type Tube Furnaces across the globe at the incredibly low prices. We are counted among the prominent Manufacturers, Suppliers and Exporters of the Split Type Tube Furnace from Uttar Pradesh. Offered in many specifications like the 1400°C Split Tube Furnace with process tubes up to 5½" diameter, etc. these Furnaces stand tall on the client’s performance expectations as well as the set industry standards.

More About Split Type Tube Furnace :

  • ASCO” Automatic temperature controlled Electric Split type Tube furnace:-
  • “ASCO” Split type tube furnace which is splited two half Round Refractory open grooved block if open door, if you like, opening of grooved may be closed.
  • The High temperature Split type furnace fitted with Silicon Carbide heating or Kanthal APM element Rod, in high temperature block duly insulated with ceramic board and blanket etc. Double body construction fitted with Microprocessor Based P.I.D. ( Time & Temperature ) Programme with 2 profile, each profile of 8 programme segment of Heating , Cooling & dwell times. Two profiles may be combined for getting 16 Segments.

 

The key Features of the 1400°C Split Tube Furnace with Process tubes up to 5½" Diameter are listed below :

  • Maximum operating temperature is 1400°C

  • Up to 6" inner diameter heated chamber

  • Process tube diameter range up to 5½"

  • 230 volts single phase or 440 Volts, 3 -Phase, electrical requirements

  • Heated chamber length range of 24" or 36"

  • Vacuum formed ceramic fiber heating Insulation

  • Vertical or horizontal mounting is possible

  • Brackets incorporated for vertical mounting

  • Removable/customizable vestibule blocks with two vestibule blocks one for each end and optional additional vestibule blocks

  • 10' interconnecting power cable is part of the purchase o f a control system

  • Incorporates Type K inconel sheathed thermocouple(s) one per zone

  • Hole sizes include0.50", 1.00", 1.50" 2.00", 2.5", 2.75", 3.00, 3.50", 4.00", 4.50", 5.00", and 5.50"

  •  Solid as well as custom sizes are also available